Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

The content in this article is appropriate for: Administrators and Supervisors

Step-by-step creation of a scheduled report using components of the Call explore.

This article covers:

💡 Before any report is created, it is recommended that you evaluate what is already present on the SC Analytics platform. This article will walk you through everything required to create a report consisting of multiple looks, from start to finish. All of these steps may not be necessary if simple modifications to a LookML dashboard, or existing Looks will produce the same end result. Take stock of what you have already created in your Personal and Shared spaces, as some of the work may already be done!
If you find that other measures or dimensions, differing from those listed here, are more useful to you-- utilize them instead of or in addition to the sample. SC Analytics is a powerful and extremely customizable tool.

Choosing the Dimensions and Measures

Put together a list of items that you would like the report to contain.

For example:

  • All calls from the past month, all campaigns, all agents

    • Answered calls rate

    • Disposition

    • Breakdown of call time

Creating the Looks

The action items above can all be made into separate looks.

  • Log in to SC Analytics

  • Click on your name in the left-hand navigation bar to load your personal space

    *If you have not saved anything to your personal space, you will see the following message on the right:

  • Click on Explore, and then on Calls

    The Calls explore will open, with its one default filter (Call Date= today)

Answered Calls Rate Percentage:

  • Scroll through the list on the left until you find a suitable measure for this statistic

    Click through everything on the the left to find precisely what you are searching for. There are many options and it may take some time for you to familiarize yourself with them all.

  • Click the measure to add it to the look. It will now be shown on the right side of the screen.

    Notice that if you click Run, the platform will return data but only using the default filter of Today.

  • Set the filters for this look:

    • [All calls from the past month]
      *Since the Call Date filter is already in place, it just needs to be modified to suit your needs

      • Click on the arrow to the left of FILTERS to view its settings

      • Click the up/down arrow in the first text box and choose is in the past

      • Reset the middle number to 1

      • Click the up/down arrow in the last text box and choose months 

        When using the months filter, be aware that it refers to the calendar month only.
        For example: If you are running a query with this setting and it is January 2nd, you will only get data from January 1 and January 2. 
        To see data from the past 30 days, you will need to set the filter to is in the past \ 30 \ days.

  • [All campaigns]

    • Click the arrow to the left of Campaigns to expand its list of dimensions

    • Hover your mouse over the first dimension, Campaign

      This will bring up the options for the dimension

      In this case, do NOT click the Campaign dimension. Doing so will add it to your query, and we only want to filter by Campaign.

    • Click on FILTER to add the filter on the right-hand side

      Because we want to include ALL campaigns, the default settings can be left as-is. Otherwise, click in the text box to add a list of the desired campaigns you wish to include in the query.

    • [All agents]

      • Click the arrow to the left of Agents to expand its list of dimensions

      • Hover your mouse over the Agent ID* dimension
        *In this example, you could also use the Agent Name filter instead. Another option is to use both.

      • Click on FILTER to add it

      • Hover your mouse over the Agent Name dimension

      • Click on FILTER to add it

      • Leave both filter settings as-is to include all Agent IDs and names

  • Click Run to test the query

  • Choose a Visualization option

    • Click the arrow to the left of VISUALIZATION to expand the list of available choices

    • Click through each to see how the data would be displayed

      Not all options will be appropriate for all queries
      For example: clicking on the Map visualization will return this message:

      Select the visualization that makes the most sense for the data that will be displayed.

    • Click the Single Value option

  • Save the look

    • Click the settings button in the top right

    • Click on Save as a Look

      • Add a Title and an optional Description

      • Browse for a save location by choosing a folder on the left

        Remember that saving into the Shared space means other users can access and make changes to this look. Saving into your Personal space means that only you can see it.

      • Click Save to save the look and return to the explore or click Save & View Look to save and then run as a new query.

Disposition Data:

  • Access the Calls explore 

  • Click the arrow to the left of Disposition Categories to expand its list of dimensions

    *Because we only want to know the dispositions for the calls in the last month, there is no calculation needed here, and therefore this look will not utilize a measure.

  • Click to add Disposition and Disposition Category to the query

  • Click to add Agents \ Agent name

  • Click to add Calls \ Call Date

    The dimensions are added to the look in the order they were selected.

    The dimensions can be re-ordered by clicking and dragging left or right.

  • Set the filters for this look:
    (Filters are same as the previous look)

    • [All calls from the past month]

      • Adjust the existing Call Date filter to show is in the past \ 1 \ month

    • [All campaigns]

      • Scroll to Campaigns and expand its list of dimensions

      • Click FILTER on Campaign to add it

      • leave settings as-is

    • [All agents]

      • Scroll to Agents and expand its list of dimensions

      • Click FILTER on Agent ID and Agent Name

      • leave settings as-is

  • Click Run to test the query

    Because some calls may have blank dispositions, you may need to scroll down before seeing any data in those columns.

  • Sort by desired column

    • Click the column header to sort by that dimension

      The column that is being used for sorting will be indicated by either an up ^ or down v arrow.

  • Choose a visualization option

    • Since this is simply a list of data, other visualization options do not apply, and the default Table should remain selected

  • Save the look using the same steps as in the previous look 

Call Times Chart:

  • Access the Calls explore

  • Click the arrow to the left of Calls to expand its list of dimensions and measures
    *This look is comprised of all measures that use average minutes. There are many other choices including min, max, totals and other time frames like seconds or hours.

  • Click to add the following measures:

    • Time in Call Measures \ Average Minutes in Call

    • Time in Dispo Measures \ Average Minutes in Dispo

    • Time in IVR Measures \ Average Minutes in Ivr

    • Time in Primary Offer Measures \ Average Minutes in Primary Offer

    • Time in Queue Measures \ Average Minutes in Queue

    • Time in Ring Measures \ Average Minutes in Ring

    • Time in Rollout Measures \ Average Minutes in Rollout

    • Time in TPO Measures \ Average Minutes in TPO

    • Time on Hold Measures \ Average Minutes on Hold

  • Set the filters for this look:
    (Filters are same as the previous look)

    • [All calls from the past month]

      • Adjust the existing Call Date filter to show is in the past \ 1 \ month

    • [All campaigns]

      • Scroll to Campaigns and expand its list of dimensions

      • Click FILTER on Campaign to add it

      • leave settings as-is

    • [All agents]

      • Scroll to Agents and expand its list of dimensions

      • Click FILTER on Agent ID and Agent Name

      • leave settings as-is

  • Click Run to test the query

Choose a visualization option:

  • Click on Bar graph
    *Since this look contains multiple measures with varying results that are meant to be compared to one another, the Column or Bar graph options are best suited here.

    Each measure is pre-assigned a color. To make changes to that or to any of the bar graph settings, click the Settings icon.
    *Visualizations can be customized with various pre-made color themes or you can create your own. For more details on custom color palettes and using the color picker, click /wiki/spaces/~557058feff2b718f3646118be1a02d2d0a4f5c/pages/3402246219.

    Inside the Settings menu, you can also tweak the visual representation of the data output. the changes will be made in real time so you can see how it would look.

  • Any changes you make will be automatically saved when you close the Settings pop-up.

Save the look using the same steps as in the previous look 

Compiling the Dashboard

Now that all three looks are complete, they need to be combined into a central location so that all 3 queries can be run and viewed simultaneously. This is what dashboards are built to do.
To create a new dashboard:

  • Browse to your personal space, if not already there

  • Open one of the looks that were just created

  • Click the Settings icon in the top right corner of the look

  • Click on Add to Dashboard

  • Because we are creating a NEW dashboard, click on New Dashboard

    *If this look was being added to an existing dashboard, select the desired dashboard from the space by clicking its name, and then click Add

  • Type a name for the dashboard and click OK

    The new dashboard will now appear highlighted in the dropdown list and the message at the top of the pop-up will reflect the visualization type of the look that was just added.

    Another way of adding a look to a dashboard is to refer to the right-hand side of the screen when inside the look:

    Add to Dashboard can also be clicked here and the steps are the same as above.

  • Add the other two looks by using one of the methods above.

  • Browse to your personal space and click the new dashboard containing the three looks that you just added

    • By default, the looks will be stacked vertically, in the order they were added

Edit the default layout of the dashboard:

  • Click Edit in the top right

  • Resize looks by hovering your mouse in the bottom right corner of the look, then clicking and dragging it to make the tile larger or smaller

  • Change the positioning of looks by hovering your mouse in the top left corner of the look, then clicking and dragging the tile up or down

  • While in Edit mode, you can also do the following:

    • Looks: view a list of all your individual looks.
      Any that are contained within this dashboard will have the Remove option to take them out of the dashboard:

      And the rest will display an +Add option:

    • Text: Any text added in this pop-up will display in its own tile at the bottom of the dashboard:

      • Any text typed into the Body can be formatted using the markdown toolbar. This gives you the option to add:

        •  Bold text

        •   Italicized text

        •  Quoted text

        •   HTML code

        •  Clickable link to another report

        •  Bulleted list

        •  Numbered list

      • Click Save to view your formatted text in the dashboard

    • Filters: Add or Edit any of the filters on the individual looks contained in the dashboard. Any change made here will be reflected on the individual look and vice versa.

    • Settings: Modify selected options on the dashboard

      • Run on Load: [defaulted ON] The dashboard will perform a database query once at load time

        This setting is turned OFF on all LookML dashboards. Doing so provides the user with a Run button on the top left of the dashboard so that they can choose when to perform the database query.

      • Dashboard Auto Refresh: when enabled, the user can use the dropdowns to select the timing at which to refresh the data.

      • Auto Refresh can also be set on the Dashboard Element Name

  • Once you are happy with the arrangement, click Done Editing in the top right

Scheduling

Setting a schedule for any report is optional; however, it is the best option if you would like to keep the saved dashboard in your personal space and still share the data with others.
Once you have a list of recipients, and an idea of the settings you would like for the report (when to send, how often, etc) the steps outlined in /wiki/spaces/~557058feff2b718f3646118be1a02d2d0a4f5c/pages/3402245999 will walk you through the process. 

  • No labels